• Home
• About Us
• Case Studies
• News
• Geothermal Energy
• How it Works
• Non-Domestic
• Contact Us

Homepage > Geothermal Energy > Non-Domestic > Non-Domestic Initial Project Information Form

The following information is helpful in designing an appropriate EarthEnergy™ System for a building project. This form should be completed as fully as possible, to provide a starting point for a design

Please complete all fields. Please use the details on the contact page if you wish to send us any plans.

Project Type:
Name and contact details of the person that you would like us to deal with on your project
Name:
Company:
Postal Address:
Postcode:
Home Telephone:
Work Telephone:
Mobile Telphone:
Email Address:
Location of Project Full Address:
Postcode or UK Grid Reference :
Timescale:	Start	Finish
Is there access to open ground adjacent to the building		Yes No
What are the dimensions of the land available for the ground heat exchanger?
	Width (m)	Length (m)
Please send a site plan showing building footprint and available land.
Is the project a...		New Build Retrofit
Has an architect been appointed?		Yes No
If yes, please supply contact details
Has an M&E consultant and or M&E contractor been appointed		Yes No
If anything is known about the geology of the site please provide whatever information you have e.g. chalk, limestone, clay etc, details of test borings or locations of any adjacent water wells. If a site investigation has been conducted please send to the details on the contact page.
Description of basic building construction, glazing and insulation level, e.g. high/low thermal mass, high/low insulation, high/low areas of glass
Is space heating required?		Yes No
Is space cooling required?		Yes No
Is domestic hot water required?		Yes No
Building energy Loads
Ideally we require the anticipated monthly heating and/or cooling loads for the building. If you do not have monthly profiles available please indicate the overall anticipated loads
Month	Heating kWh	Cooling kWh
January
February
March
April
May
June
July
August
September
October
November
December
If monthly heating and/or cooling profiles are not available please supply ambient temperature on design day(s) and associated heating and/or cooling load e.g. –1°C 250 kW heating
Design day temperature heating	°C
Heating Load	kW
Design day temperature cooling	°C
Cooling Load	kW
Note: (Cooling load should be total, i.e. sensible + latent)
Maximum continuous hours at design day heating load
Maximum continuous hours at design day cooling load
Ground floor area of building		m sq
Total of all floor areas		m sq
Building configuration and orientation
Number of occupants
Lighting and small power loads		kW
Other substantial internal gains		kW
Building Occupancy pattern
No of days of operation per week
No of hours heating per day
No of hours cooling per day
Estimated energy consumption per m sq for heating		W/m sq
Estimated energy consumption per m sq for cooling		W/m sq
Is tempered fresh air treatment being considered?		Yes No
Are ventilation heat recovery units being considered?		Yes No